Heavy Duty Solenoid
A heavy duty, 85A solenoid made with a plated steel housing with 5/16'' copper contact terminals provides the main control. It parallels the two batteries when the ignition is turned on and provides the essential isolation between the auxiliary and main battery when the ignition is off.
If the auxiliary battery is significantly larger than the starting battery, the auxiliary may flatten the starting when the ignition is turned on, not allowing the engine to start. The ignition switch allows the isolator to be turned off from within the cabin to allow the engine to be started before activating the solenoid.
Provides surge protection for vehicles with electronic ignition systems.
Suits all vehicles
The solenoid isolator can be fitted to all 12V vehicle types.
* PART NO. : DBS085K
* VOLTAGE : 12V only
* CHARGING CURRENT : 85A/150A peak
* CHARGE TYPE : Parallel
* CONTROL : Ignition
* MOUNTING : Surface/firewall
* CURRENT DRAW : 780mA when charging
* VOLTAGE DROP : None
* SURGE PROTECTION : Yes (SG100)
Premium HD solenoid (P/No. DBS085)
Surge protector (P/No. SG100)
4m battery cable & 60cm aux battery earth cable
Auxiliary battery terminals (pos & neg)
Rocker switch, lugs, terminals, heat shrink & cable ties
Weight: 3.00 kilos